The CYCLONE XT is the consistent further development of its predecessor CYCLONE. With an incredible wingspan of 6,20m, it is the giant in the electric glider sky! The epithet XT stands for "extended". The model has a painted GRP fuselage and two 2-piece wings with Abachi planking and GRP carpet pad. Its new LS 6330-15 brushless drive is rated for 8S LiPo operation for powerful climbs and easy takeoff from the launch trolley.
The outer wing design, electrical wing mating using MPX connectors in mounting frames and the new LS 6330-15 long shaft drive motor are the main features of the new Cyclone XT, along with the increased wingspan. The canopy latch has been moved to the rear under the wing/fuselage moldings as is common with large scale model gliders.
The successful HQ/W airfoil has been left in place. It runs from an HQ/W-2.5/12 at the root rib to an HQ/W-2.5/11 in the center and finishes at the winglet with an HQ/W-3/10.5. This is an excellent way to fly extended thermal flights, as this is the CYCLONE XT's profession. The flight characteristics are as usual good-natured and quiet.
Features:
New Ro-Power Torque LS 6330-15 drive for 8S LiPo (PNP version only).
Two-piece fuselage made of GFRP/Kevlar reinforced with CFRP
Wings completely covered with abachi for high compressive strength
Ready covered with ORACOVER®
Four-part wing, separable
Wings pluggable with MPX connectors in mounting frame for electrical connection (PNP version only)
Solid 14x500mm round steel mating of the inner surfaces, 12x375mm carbon mating for the outer wings
Middle wings on the upper side completely underlaid with 200g carbon fabric, underside 80g glass fabric
Outer wings completely underlaid with 80g glass mat
New canopy lock under wing
High quality M3 linkage accessories Made in Germany
Stable elevator linkage with 5/3 mm CFRP tube and M3 clevises
Reinforced tail construction
Continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
Precisely fitted anti-twist devices in all wing sections
High degree of prefabrication
Technical data :
Wing-span (mm) : 6200
Flight weight approx. (g) : 11400
Length (mm) : 2250
Manufacturer : Robbe Modellsport
Fuselage : Carbon/FiberGlass
Wings : Styro/Fiberglass/Abachi
Rec. engine : Ro-Power Torque LS 6330-15
Rec. Battery : 8S/5000-7000mAh LiXX
Version : ARF - ALMOST READY TO FLY
Flight Skill : Professional
Build Skill : Advanced
Drive Type : Electric
Box contents
Model CYCLONE XT largely prefabricated
Two-piece fuselage made of GRP/Kevlar CFRP reinforced
Abachi planked wings, GRP/CFRP reinforced
Ready covered with ORACOVER
Assembly instructions in German/English/French
General Info
Brand
Robbe
Item Nr
ROB2665
Airplane - Specs
Material
Full composite
Wingspan (mm)
6200
Model Length (mm)
2250
Take-off Weight (g)
11400
Airplane - Functions
Controls
Flaps
Motor
Ailerons
Elevator
Rudder
Required Radio (Not included)
Min. 6 Channel
Airplane - Power System
Power System
Not Included (See Needed to complete)
Propeller / EDF
Not Included (See Needed to complete)
Speed Controller - ESC
Not Included (See Needed to complete)
Required Battery (Not included)
Li-Po 8S - 5000/7000mAh - Min. 25C
Airplane - Electronics
Receiver
Not Included
Qty of Servos
6x Servos | (Not Included | See Needed to complete)
