The rocker of the center of gravity scale on which the model rests has stops and therefore has a maximum deflection of 10° in both directions. This means that the model can no longer fall off the rocker, even if, for example, the model's battery is removed.
The wing stop has also been arranged with a 10° incline. When the rocker is at the stop in the front end position (10°), the model can be placed. In the neutral position when weighing, the wing stop no longer interferes.
The center of gravity can be set to the millimeter using the engraved scale.
The wooden parts are CNC milled from high-quality and stable 15 mm birch multiplex. The plug-in system makes the center of gravity scale even more stable and therefore easy to assemble.
The wooden parts are stuck with self-adhesive rubber at the support points so that the model is held securely and not damaged.
Operation
- 1: Set the specified center of gravity for your model using the scale.
- 2: Bring the rocker to the front stop position. It now has exactly 10° deflection. In this position, the stop can be used as an adjustment.
- 3: Your model will no longer slip due to the rubber pad. If it does, you can always check the correct position by moving the rocker to the front stop. The model can now be balanced. To do this, also check the light gap at the base of the rocker. Setting the center of gravity in the front stop of the rocker has the advantage that the wing stop no longer interferes in the neutral position.
- 4: The rear stop serves to prevent the model from falling off if, for example, the battery is completely removed.
Technical data:
- Height of rocker with ball bearings: 250 mm
- Max. model width with connector: 240 mm
- Max. model weight: 25.1 kg
- Max. position of center of gravity of nose strip: 200 mm
- Max rocker angle: +/- 10°
Scope of delivery
- CNC milled parts (unsanded and connected)
- 4 x wing screw M6
- 2 x ball bearing 626 2RS
- 2 x ball bearing press-in aid
- 2 x M6 x 25 screw
- 4 x 2.9 x 9.5 self-tapping screw
- 6 x threaded inserts with hexagon socket for easy assembly
- 6 x washers M6 large
- 4 x washers M3 large
- 8 x washers M6 small
- 10 x wooden dowels
- 1 x self-adhesive neoprene rubber
- 2 x engraved Teil-Q logo
- 2 x engraved scales
- 2 x engraved pointers
- 1 x illustrated assembly and operating instructions
